Stripe

Description

PLEASE NOTE THIS DESIGN IS NOW DSCONTINUED WITH ONLY LIMITED LEFT IN STOCK

STRIPE stands out from all other panels because of the graphic linier design of design.

LED strip can be inserted into this panel.

At 1135 mm x 380 mm, Liquid is the same size as the other panels.

The 3D effect of this model is particularly accentuated thanks to the maximum thickness of 38 mm.

The harmoniously balanced design makes for an impressive supplement to the existing collection. Whether for an entire wall, as a targeted interior highlight, colour accentuation or in combination with lighting.

Key Points

• Design: STRIPE.
• Size: 1135 x 380x 38mm 0,40 m2 /pc
• Weight: 1.9kg /pc
• Handy size & lightweight.
• Polyurethane: a familiar, easy material to use.
• Finish: White sprayed matt acrylic primer, smooth face.
• Easy, quick and fast to install.
• Paint with any quality wall paint.
• Good sound proofing quality.
• Heat insulation properties.

Installation Guide

MATERIALS REQUIRED  Sandpaper grit 150 or finer, Brush / sponge, Spirit level, Ruler and pencil, Nail clamps or nails; wood strip if necessary, Hammer, Liquid nails type glue, Cartridge applicator, Spacers (e.g. 1-2mm tile crosses) ,Battery screwdriver, Spatulas, Circular saw with guide rail, Protective goggles, HDPS/PU saw, Finish paint, Painting tools.

WALL PANELS must be stored flat in a dry place.

The recommended temperature is +15 °C to +25°C with a relative humidity of 45% to 65%.

To achieve optimum results, the products should be fitted under similar moisture and temperature conditions as present after the installation (indoor environment). Fitting on a wet backing surface (fresh plaster) and in forced drying conditions (heat gun, dehumidifier, exceptionally high temperature) are to be ruled out.

Check panels and substrates for suitability. The following backing surfaces are suitable: indoor plastered or papered surfaces, coated plaster. Surfaces must be clean, dry, free from dust, degreased and flat; rough down if necessary. If the product is to be applied to particular backing surfaces, please consult our technical department.

Shipping

Shipping will be calculated during the checkout process.

Example, 1 or 2 boxes of panels will cost £9.95 +vat

More will increase the cost slightly due to the weight and amount of consignment packages.